Ozito X PXC PXGMTK-4182 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 40

background image

TAB

RECESS

TAB

RECESS

18

Fitting the Connecting Tube on the Motor Tube

Depending on the attachment fitted, the connecting tube can be connected directly to the motor

tube if the extension pole is not needed.

1. Push the connecting tube carefully into the

motor tube, aligning the tab with the recess

as you do so. Push both halves together until it

will not go any further.

Note:

The connecting tube can only be fitted

one way. Do not force connecting tube into the

motor tube, turn the attachment over if it does

not fit first time.

2. To lock together, turn the tube nut clockwise

until tight.

SETUP & PREPARATION

SETUP & PREPARATION (cont.)

Fitting the Extension Pole

Depending on the required working height, the extension pole can be fitted between the connecting

tube and motor tube.

Note:

The connecting tube will need to be removed from the motor tube if fitted.

1. The extension pole fits into the motor tube the

same way as the connecting tube as described

above.

Note:

The extension pole can only be fitted one

way. Do not force the extension pole into the

motor tube, turn the attachment over if it does

not fit first time.

2. To lock together, turn the tube nut clockwise until tight.

«
...
16
17
18
19
20
...
»

Содержание X PXC PXGMTK-4182









































Отзывы:

Нет отзывов

Похожие инструкции для X PXC PXGMTK-4182

Бренд: Makita Страницы: 10

Бренд: Makita Страницы: 9

Бренд: Makita Страницы: 48

Бренд: Makita Страницы: 8

Бренд: Makita Страницы: 11

Бренд: Makita Страницы: 5

Бренд: Makita Страницы: 2

Бренд: Makita Страницы: 15

Бренд: Makita Страницы: 2

Бренд: Makita Страницы: 2

Бренд: Makita Страницы: 14

Бренд: Makita Страницы: 2

Бренд: Makita Страницы: 20

Бренд: Makita Страницы: 9

Бренд: Ulvac Страницы: 87

Бренд: Makita Страницы: 16

Бренд: IVT Страницы: 40

Бренд: Milwaukee Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды