Oxygen X-Air C200, Инструкция по установке и эксплуатации

Страница: 18 / 40

17
8. CONNECTION OF THE UNIT
Mains supply, control panel cable and, if necessary, comfort function connector should be connected
to the Unit, according to the following diagram:
Figure 7. Connection of the Unit
IT IS PROHIBITED to connect any cables or devices to the connectors of the control panel and comfort
functions, despite similarity to any standard connectors. External similarity of connectors does not
guarantee compatibility – connected devices may fail or damage the Unit. Failure of the Unit due to
incompatible supplementary parts connection will void the warranty!
IT IS PROHIBITED to connect or disconnect control panel or WiFi controller without turning off the
mains power first. The failure of the control panel or the Unit due to improper connection will void
the warranty!
8.1. Connecting electric circuit
WARNING!!!
 To prevent accidents and potential damage to the Unit, it can only be connected by a qualified
technician. Do not attempt to do that by yourself!

Mains supply power rating shall comply with the rating indicated in the Unit manual.

Mains supply should be disconnected when connecting the Unit.

The Unit should be connected according to diagram provided in the User Manual.
 Only power cable provided with the Unit should be used to connect it to power source.
 Grounding should be installed in compliance with the requirements of effective legislation and
standards when connecting the Unit to mains supply.

Electric circuit must be equipped with suitable power circuit-breaker.
- Control panel connector (USB)
- Comfort functions connector (RJ-45)
- Mains cable (230V, 3x1.5mm
2
L+N+PE)