Oxygen X-Air C200, Инструкция по установке и эксплуатации

Страница: 25 / 40

24
Figure 14. WiFi connection set-up

WiFi Manager window will pop up after succesfull connection
 click "Configure WiFi" button
 locate and select your home WiFi network in the list
 enter your home WiFi network connection password

click "Save"
WiFi controller will connect to your home WiFi network after accomplishing all tasks
IMPORTANT! In case (usually due to smartphone or tablet security settings) WiFi Manager window
does not pop up, connect to WiFi Manager console using browser (Safari, Chrome or similar) by
entering 192.168.4.1 in the address field. Make sure that your device (smartphone or tablet) is
connected to OXYGEN_xxxxxx WiFi network (you may be asked to confirm connection by hitting "use
without internet" or similar button.
IMPORTANT! If it is necessary to control the Unit without connecting it to home WiFi network, change
the standard system password immediately. Change it by connecting to management console using
browser. Broadcasting of secure WiFi network OXYGEN_xxxxxx
s will then become permanent.
IMPORTANT! App will only access the Unit if both WiFi controller and device are connected to the
same home WiFi network.