Oxygen X-Air C200, Инструкция по установке и эксплуатации

Страница: 24 / 40

23
9.1.2. WiFi connection set-up
Plug in the WiFi controller then power-up the Unit. Connect WiFi controller to your home WiFi network
first:
Figure 13. WiFi connection set-up
 Locate and connect to unprotected WiFi network OXYGEN_xxxxxx
IMPORTANT! WiFi controller will only broadcast unprotected WiFi network for 2 minutes. If You fail
to connect while it is active, broadcasting will stop. Slightly press and release immediately the hidden
button through the small hole on WiFi controller body with thin screwdriver (safety-match, toothpick)
to restart broadcasting.
IMPORTANT! In case of home WiFi network device (router or ADSL modem) failure or any other
failure to properly configure WiFi controller, the broadcasting of secure WiFi network
OXYGEN_xxxxxx
s may start. Connect to it using standard system password 123123123123.