OWL WT-1 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 56

background image

After data has been downloaded to the PC with OWL Reporter, it is recommended to save the data to a file, and clear the memory
from the WaveTester.

To clear data from the WaveTester, while the unit is OFF, press and hold

then press

.

The

icon will disappear from the display when the data has been successfully cleared.

Data cleared from the WaveTester is irretrievable. Please ensure that you have downloaded and saved the data to a PC

before clearing the WaveTester memory.

SAVE

OPERATION/MAINTENANCE

ERR

- This error code will appear when the user has not waited long enough for the meter to acquire power readings for the

wavelengths associated with the selected fiber type (850 and 1300nm for MM; 1310 and 1550nm for SM). This error will only
occur when the WaveTester power meter and WaveSource light source are both in AUTO mode, and only occurs during data
storage or setting reference.

HZ

- This error code will appear when the user attempts to store data and the meter is NOT in AUTO mode, but is receiving a

modulated tone from the light source.

BAD

- This error code will appear when the user attempts to store data at too many wavelengths. The WaveTester can only store

data for a maximum of 3 different wavelengths.

FUL

- This error code will appear when the storage memory is full, and no more data can be stored. The WaveTester can store up

to 200 data points.

CLEARING DATA FROM WAVETESTER MEMORY

WAVETESTER DATA STORAGE ERROR CODES

44

«
...
44
45
46
47
48
...
»

Содержание WT-1

























































Отзывы:

Нет отзывов

Похожие инструкции для WT-1

Бренд: Atomos Страницы: 4

Бренд: Kane Страницы: 16

Бренд: Kane Страницы: 60

LaserRange-Master T4 Pro

Бренд: LaserLiner Страницы: 68

DC1500 CHLORINE

Бренд: LaMotte Страницы: 60

Бренд: palintest Страницы: 14

Бренд: FMS Страницы: 12

Бренд: ELGO Electronic Страницы: 24

OPERA CONTROL CENTER SERVER - V 3.5

Бренд: OPTICOM Страницы: 21

Бренд: Hanna Instruments Страницы: 28

RLACS277RLACS29

Бренд: Racelogic Страницы: 10

Бренд: A&D Страницы: 2

Бренд: Rinstrum Страницы: 2

DUAL-BLEND 4114

Бренд: NCL Страницы: 7

Бренд: Bamo Страницы: 16

WaveRunner 8000-R

Бренд: Teledyne Lecroy Страницы: 20

xStorage Home Series

Бренд: Eaton Страницы: 16

Бренд: Anslut Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды