OWL The Otter SGC-1 Скачать руководство пользователя страница 20

Страница: 20 / 20

arranty Information

THE OWL SEPARATION SYSTEMS WARRANTY

A three-year quality and material warranty covers all products manu-

factured by Owl Separation Systems. Owl will repair or replace any

equipment found to be defective at no cost. This warranty does not

cover equipment damage due to misuse or abuse. After the warranty

expires, Owl will repair products at a reasonable cost. All shipping

claims must be made within 48 hours from date received.
To activate your warranty, complete and return the enclosed postage

paid warranty card. Please note that the card must be completely filled

out in order to process your warranty.

RETURNING EQUIPMENT

Be environmentally friendly – and speed up your return – by saving

all packing materials cartons and documents until you have thoroughly

inspected your shipment. Should you find that your order is incorrect or

damaged, verify the problem with the shipper, save all packing mate-

rial, and call Owl for return instructions within 48 hours. All returns,

exchanges, and credits must be pre-approved by Owl.

55 Heritage Avenue

Portsmouth, NH 03801
T. (603) 559-9297

(800) 242-5560

F. (603) 559-9258
Website: www.owlsci.com

E-mail: [email protected]

Thank You!

We at Owl Separation Systems

thank you for your order and

appreciate your business.

Please contact us regarding our

complete line of electrophoresis

equipment and reagents

for DNA, RNA and protein

separations. While innovation

and quality are our foremost

objectives, we pride ourselves

on exceptional customer

response and service.

IMPORTANT DOCUMENTS ENCLOSED

Model #:
Serial #:
C.T.:

Содержание The Otter SGC-1





















Результаты поиска

Содержание The Otter SGC-1

Отзывы:

Похожие инструкции для The Otter SGC-1

Бренды по названию

Популярные бренды

OWL The Otter SGC-1, Руководство пользователя

Результаты поиска

Содержание The Otter SGC-1

Отзывы:

Похожие инструкции для The Otter SGC-1

Бренды по названию

Популярные бренды