background image

C

are & Cleaning

SECTION 5

14

Care of Acrylic

This list does not include all possible chemical incompatibilities and safe compounds. 

Owl’s acrylic products should be cleaned with warm water, a mild detergent such as 

Alconox™, and can also be exposed to a mild bleach solution (10:1). In addition, RNAse 

removal products are also safe for acrylic. Please contact Owl’s Technical Service at 

1-800-242-5560 with any questions.

The following chemical compatibility chart is supplied for the convenience of our custom-

ers. Although acrylic is compatible with most solvents and solutions found in the biochemi-

cal laboratory, some solvents can cause substantial damage. Keep this chart handy to avoid 

harm to your apparatus by the use of an inappropriate solvent.

Codes:

S

–Safe (No effect, except possibly some staining) 

A

–Attacked (Slight attack by, or absorption of, the liquid)

 

(Slight crazing or swelling, but acrylic has retained most of its strength)

U

–Unsatisfactory (Softened, swollen, slowly dissolved) 

D

–Dissolved (In seven days, or less)

Table 7-1 Chemical Compatibility for Acrylic-Based Products

Chemical 

Code Chemical 

Code  Chemical 

Code

Acetic acid (5%)                                 S     Ethyl alcohol (50%)                                 A         Naptha                                       S
Acetic acid (Glacial)                           D     Ethyl alcohol (95%)                                 U         Nitric acid (10%)                         S
Acetic Anhydride                                A     Ethylene dichloride                                  D         Nitric acid (40%)                         A
Acetone                                              D     Ethylene glycol                                        S         Nitric acid concentrate               U
Ammonia                                            S     2-Ethylhexyl Sebacate                            S         Oleic acid                                   S
Ammonium Chloride (saturated)        S     Formaldehyde (40%)                              S         Olive oil                                      S
Ammonium Hydroxide (10%)             S     Gasoline, regular, leaded                        S         Phenol 5% solution                    U
Hydroxide (10%)                                S     Glycerine Heptane (commercial grade)  S         Soap solution (Ivory)                  S
Ammonium Hydroxide concentrate    S     Hexane                                                    S         Sodium carbonate (2%)             S
Aniline                                                D     Hydrochloric acid (10%)                          S         Sodium carbonate (20%)           S
Benzene                                             D     Hydrochloric acid concentrate                 S         Sodium chloride (10%)               S
Butyl Acetate                                      D     Hydrouoric acid (40%)                           U         Sodium hydroxide (1%)              S
Calcium chloride (saturated)              S     Hydrogen peroxide (3% solution)            S         Sodium hydroxide (10%)            S
Carbon tetrachloride                          U     Hydrogen peroxide (28% solution)          U         Sodium hydroxide (60%)            S
Chloroform                                         D     Isooctane                                                 S         Sodium hydrochlorite (5%)         S
Chromic acid (40%)                           U     Isopropyl alcohol (100%)                        A         Sulfuric acid (3%)                       S
Citric acid (10%)                                S     Kerosene (no. 2 fuel oil)                          S         Sulfuric acid (30%)                     S
Cottonseed oil (edible)                       S     Lacquer thinner                                       D         Sulfuric acid concentrate           U
Detergent Solution (Heavy Duty)       S     Methyl alcohol (50%)                              A         Toluene                                      D 
Diesel oil                                            S     Methyl alcohol (100%)                            U         Trichloroethylene                        D
Diethyl ether                                       U     Methyl Ethyl Ketone                                U         Turpentine                                  S
Dimethyl formamide                           U     Methylene chloride                                  D         Water (distilled)                          S
Dioctyl phthalate                                A     Mineral oil (white)                                    S         Xylene                                        D 
Ethyl acetate                            D               

Содержание The Otter SGC-1





















Отзывы: