Overland Data DLT LoaderXpress, Инструкция по установке и эксплуатации, Страница: 57 / 78

DLT LoaderXpress™ 3-25
O
PERATION
•
The
✶
reappears at the beginning of line 2, indicating you have made a
selection.
•
The
u
moves to line 4, meaning you can select a destination
*MKYVI0SEH9RPSEH8S)RXV]7GVIIR
Press
Enter
to select Slot 2 as the destination.
The
↓
at the end of line 4 indicates there are additional choices available because:
•
You have selected a drive as the source, so the destination must be a slot
•
All the slots except Slot 1 are empty, so below Slot 2 there is a list of the
remaining empty slots.
For this example, select Slot 4. Press the
q
button repeatedly until Slot 4 appears on
line 4. Press
Enter
to select Slot 4. The confirmation screen displays
*MKYVI'SRJMVQEXMSR7GVIIR
As the confirmation screen indicates, press
Enter
to execute the load or unload. If the
confirmation screen does not show your intended source and destination, press
Escape
to return to the To entry screen.
When you press
Enter
, the following screen displays. (If the source is a slot, Load in
Progress displays on Line 4.)
From:
✶
DLT 1
To:
u ✶ Slot 2
$
From: DLT 1 To: Slot 4
ENTER to Execute
ESCAPE to Cancel