Overland Data DLT LoaderXpress, Инструкция по установке и эксплуатации, Страница: 55 / 78

DLT LoaderXpress™ 3-23
O
PERATION
0SEHMRKERH9RPSEHMRK8ETIW
The Load/Unload menus enable you to specify a source and a destination for a
cartridge movement. As a result, you use exactly the same procedure to load as to
unload. To load or unload a tape from the front panel of the module, use the
Load/Unload menus as follows.
Figure 3-25. Default Screen
In this example, DLT1 has a tape loaded. Loader Idle on Line 2 indicates that the drive
has a cartridge loaded, and is waiting for instructions. Line 3 indicates that Slot 1 of the
magazine contains a cartridge and the remaining slots are empty.
From the Default Screen, enter the Menu Mode by pressing
Enter
.
Figure 3-26. Main Menu
From line 1, press
Enter
to display the first Load/Unload submenu:
Figure 3-27. Load/Unload Menu
The
u
is next to line 2 which displays the top item in a scrollable list of sources. Note
that a
$
has appeared on the right of the bottom line. This means you can use the
q
button to scroll down through the list. As soon as you press the
q
button, three things
happen.
DLT No Tape
Loader Idle
1 _ _ _ _ _ _ _ _ _
t
10
u
Load/Unload
Unlock Door
Show Status Menu
Maintenance Menu
u
✶ DLT1
From:
To:
✶ Slot 4
$