Overland Data DLT LoaderXpress, Инструкция по установке и эксплуатации, Страница: 53 / 78

DLT LoaderXpress™ 3-21
O
PERATION
8ETI6IUYMVIQIRXW
The DLT LoaderXpress uses ECMA-approved and ANSI proposed-standard DLTtape
cartridges. The DLTtape cartridge is a four inch square plastic cartridge. The cartridge
and the tapes are designed to withstand 1,000,000 passes, with a shelf life of 30 years
or more when properly stored.
All models of the LoaderXpress use DLTtape IV cartridges, which contain 1800 feet of
tape. The native capacities of DLTtape IV are listed in
Table 3-1 .
Under average conditions of data compression, multiply these capacities by two when
compression is used.
'EVXVMHKI,ERHPMRKERH7XSVEKI
A DLTtape cartridge should be stored vertically until you select it for use. Do not
expose a cartridge to moisture or direct sunlight. Maintain a clean, dust-free working
and storage environment.
If a DLT tape cartridge is dropped:
•
Inspect the cartridge carefully before you insert it into a magazine or drive.
•
Shake the cartridge while listening for the sound of a broken part. Any
rattling sound makes a cartridge unfit for use.
•
Inspect the case for distortion or cracks.
•
Inspect the leader by opening the cartridge door as shown in the following
illustration. The leader should be positioned as shown in view (1), and
should protrude at about a five degree angle from the case. If the leader is
out of position, do not use it; damage to the drive could result.
Table 3-1 Tape Capacities
1SHIP 2EXMZI'ETEGMX]
0<0SV +&
0<0 +&
0<0 +&