Overland Data DLT LoaderXpress, Инструкция по установке и эксплуатации, Страница: 52 / 78

3-20 DLT LoaderXpress™
O
PERATION
-RWIVXMRKE1EKE^MRI-RXSXLI0SEHIV<TVIWW
To insert a magazine:
1) If the magazine door on the front of the module is closed and locked,
open it as follows:
•
Enter the Menu Mode by pressing Enter at the Default Screen.
•
At the Main Menu, select Unlock Door and press Enter .
2) Slide the magazine through the door opening, with the cartridges
protruding from the left.
3) When the magazine is fully inserted, push the door closed until it locks.
-RWIVXMRK'EVXVMHKIW-RXSXLI1EKE^MRI
To insert cartridges into the magazine:
1) Insert cartridges so that the label end with write protect switch outward,
with the write protect switch toward the bottom of the magazine.
2) Position the module so the cartridges protrude to the left, and the
magazine handle is toward you, as shown in the illustration.
3) Insert the magazine into the LoaderXpress with that orientation.
Figure 3-23. Tape Magazine with Cartridges Installed