background image

Form No. OVmm-0113

3

IMPORTANT SAFETy INFORMATION

ExPLOSION  hAzARD:  Do  not  store  or  use  gasoline  or

other flammable vapors or liquids in the vicinity of this or

any other appliance.
Install unit in accordance with installation instructions in

this manual.
This oven is designed specifically to heat or cook

NOT

for industrial or laboratory use.
In the event of emergency, unplug unit (Model 1313) or turn

OFF Main Disconnect switch (Model 1718).
Make sure all operators have been instructed on the safe

and proper use of the unit.
This unit is not intended for use by children or persons

with  reduced  physical,  sensory,  or  mental  capabilities.

Ensure proper supervision of children and keep them away

from the unit.
This  unit  has  no  “user-serviceable”  parts.  If  service  is

required  on  this  unit,  contact  an  Authorized  Ovention

Service Agent or contact the Ovention hotshot hotline at

855-298-6836.

BURN hAzARD:

• Some  exterior  surfaces  on  unit  will  get  hot.  Avoid

unnecessary contact with unit.

• Pan/tray will be very hot upon removal—use oven mitt,

pan gripper, or other utensil to remove.

Do not disconnect unit from power supply immediately

after use. Internal fans must cool oven to avoid damage to

electrical components.
Locate  unit  at  proper  counter  height  in  an  area  that  is

convenient for use. Location should be level to prevent

unit or its contents from falling accidentally and strong

enough to support the weight of the unit and contents.
DO  NOT  lift  unit  by  platforms  on  each  side  of  oven

chamber. Platforms are not designed to support weight of

unit. Lift from underneath oven chamber only.
Do not move or relocate unit for cleaning. Unit is bulky and

heavy.
Do not place anything on top of unit; doing so may subject

personnel to injury or could damage unit.
Do not heat sealed containers or products such as whole

eggs in oven. These items may explode.
Use  caution  and  be  aware  of  pinch  points  when  slider

assembly is moving.
Do not store any materials or items inside oven chamber

when not in use.
Improper cleaning of oven could damage catalyst and will

void unit warranty.

WARNING

CAUTION

ELECTRIC ShOCK hAzARD:

• Plug unit into a properly grounded electrical receptacle

of the correct voltage, size, and plug configuration. If

plug and receptacle do not match, contact a qualified

electrician to determine and install proper voltage and

size electrical receptacle.

• Unit must be grounded properly. Failure to ground unit

properly  could  result  in  serious  personal  injury  or

death.

• Turn off Standby switch, allow unit to cool, and unplug

unit/turn  OFF Main  Disconnect  switch  before

performing any cleaning, adjustments, or maintenance.

• DO NOT submerge or saturate with water. Unit is not

waterproof. Do not operate if unit has been submerged

or saturated with water.

• Unit is not weatherproof. Locate unit indoors where

ambient air temperature is a minimum of 70°F (21°C).

• Do not steam clean or use excessive water on unit.
• This unit is not “jet-proof” construction. Do not use jet-

clean spray to clean this unit.

• Do not clean unit when it is energized or hot.
• Do  not  clean  unit  with  metal  scouring  pads.  Metal

pieces  can  break  off  pad  and  touch  electrical

components, creating risk of electric shock.

• Do not pull unit by power cord.
• Keep power cord away from heated surfaces.
• Do not allow power cord to hang over edge of counter.
• Discontinue use if power cord is frayed or worn.
• Do not attempt to repair or replace a damaged power

cord. Cord must be replaced by an Authorized Ovention

Service Agent or a person with similar qualifications.

• This unit must be serviced by qualified personnel only.

Service by unqualified personnel may lead to electric

shock or burn.

• Use only Genuine Ovention Replacement Parts when

service is required. Failure to use Genuine Ovention

Replacement  Parts  will  void  all  warranties  and  may

subject  operators  of  the  equipment  to  hazardous

electrical voltage, resulting in electrical shock or burn.

Genuine Ovention Replacement Parts are specified to

operate safely in the environments in which they are

used. Some aftermarket or generic replacement parts

do not have the characteristics that will allow them to

operate safely in Ovention equipment.

FIRE hAzARD: 

• Do not install unit on or around combustible surfaces.

Discoloration or combustion could occur. Unit must be

installed in non-combustible surroundings only.

• Do  not  use  an  extension  cord.  If  power  cord  is  too

short, contact a qualified electrician to determine and

install proper voltage and size electrical receptacle near

unit.

WARNING

Read  the  following  important  safety  information  before  using  this  equipment  to  avoid 

serious injury or death and to avoid damage to equipment or property

.

Total Restaurant Supply - https://totalsupply1.com - Toll Free 1-800-944-9304 - Local 507-288-9454

2940 Hwy 14 W, Rochester, MN 55901

Содержание Matchbox M1313





















Отзывы: