Form No. OVmm-0113
12
OPERATION
5. Edit or create a setpoint temperature.
a. Touch either an existing “setpoint name” box or an
empty “setpoint name box”. a keypad will appear.
b. Enter the desired name using the keypad, then touch
ENTER to save and return to the Edit Setpoints screen.
Touch CaNCEL to return to the Edit Setpoints screen
without changing the name.
c. Touch the “setpoint temperature” box that corresponds
to the “setpoint name” box in the previous step. a
keypad will appear.
d. Enter the desired temperature using the keypad, then
touch ENTER to save and return to the Edit Setpoints
screen. Touch CaNCEL to return to the Edit Setpoints
screen without changing the temperature.
Edit Setpoints Screen
6. Repeat step 5 to edit or create another setpoint
temperature.
7. When the setpoint temperature changes are complete,
touch BaCK to return to the Settings screen.
• If programming is complete, touch BaCK on the
Settings screen to return the Home screen.
Uploading from a USB Drive
Use the following procedure to upload pre-programmed menu
items or firmware updates from an external USB drive. This
procedure requires access to password-protected screens and
should be performed at oven startup by authorized personnel
only.
1. move the Standby switch up to the “On” position.
• The left and right touchscreens will energize. The left
touchscreen shows the name of the oven and current
software version. The right touchscreen shows the
available setpoint temperatures.
2. Remove the cover from the USB port above the Standby
switch, and insert the USB drive into the port.
3. Touch the upper left-hand corner on the left touchscreen.
• a password keypad will appear on the touchscreen.
Back
Dinner
Breakfast
Lunch
525
425
400
Touch “setpoint name”
box to edit/create
name of setpoint.
Touch “setpoint temperature”
box to edit/create setpoint
temperature.
Touch to return to
Settings screen.
Startup Screens
4. Input the password using the keypad, and touch ENTER.
• The Settings screen will appear on the left touchscreen.
Settings Screen
5. Touch the USB icon to access the USB Interface screen.
6. Touch the desired function to begin the corresponding
upload.
• a screen will appear to indicate that the upload is in
progress.
• When the upload is complete, the oven will restart.
USB Interface Screen
7. When the startup screens reappear, remove the USB drive
from the USB port, and replace the port cover.
8. Perform the normal “Startup” procedure at the beginning of
this section to use the oven.
Back
Update
Relay
Firmware
Update
Display
Firmware
Load
Config
File
Read
Recipes
Read
Logs
UI:
X.XX
RB:
Y.YY
Touch to upload
relay firmware
update.
Touch to upload
pre-programmed
menu items.
Touch to upload touchscreen
firmware update.
Breakfast
Temperature: 425 F
Dinner
Temperature: 525 F
Lunch
Temperature: 400 F
UI: X.XX RB: Y.YY
LEFT TOUCHSCREEN
RIGHT TOUCHSCREEN
Touch here to access password keypad followed by
the Settings screen.
Back
Touch to access
USB Interface screen.
Touch to return to
Home screen.
Total Restaurant Supply - https://totalsupply1.com - Toll Free 1-800-944-9304 - Local 507-288-9454
2940 Hwy 14 W, Rochester, MN 55901
