Form No. OVMILOM-0718
15
MAINTENANCE
General
Ovention
®
Double MiLO™ ovens are designed for maximum
durability and performance with minimum maintenance.
WARNING
ELECTRIC SHOCK HAZARD:
• Place unit in standby, allow unit to cool, turn off both
GFCI switches, turn off both Control Reset switches,
and unplug unit before performing any cleaning,
adjustments, or maintenance.
• DO NOT submerge or saturate with water. Unit is not
waterproof. Do not operate if unit has been submerged
or saturated with water.
• Do not steam clean or use excessive water on unit.
• This unit is not “jet-proof” construction. Do not use
jet-clean spray to clean this unit.
• Do not clean unit when it is energized or hot.
• Do not clean unit with metal scouring pads. Metal pieces
can break off pad and touch electrical components,
creating risk of electric shock.
• This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
• Use only Genuine Ovention Replacement Parts when
service is required. Failure to use Genuine Ovention
Replacement Parts will void all warranties and may
subject operators of the equipment to hazardous
electrical voltage, resulting in electrical shock or burn.
Genuine Ovention Replacement Parts are specified to
operate safely in the environments in which they are
used. Some after-market or generic replacement parts
do not have the characteristics that will allow them to
operate safely in Ovention equipment.
This unit has no “user-serviceable” parts. If service is
required on this unit, contact an Authorized Ovention Service
Agent or contact the Ovention Hotline at 855-298-6836.
CAUTION
Do not move or relocate unit for cleaning. Unit is bulky
and heavy.
Never use steel pads, wire brushes, or scrapers to clean unit.
Wear protective rubber gloves and protective eye wear
when cleaning unit.
Improper cleaning of oven could damage catalyst and will
void unit warranty.
IMPORTANT NOTE
:
Use of cleaning chemicals not approved by Ovention when
cleaning the oven chamber will void the warranty.
Daily Cleaning
To maintain performance and preserve the finish of the
Ovention Double MiLO oven, clean the unit daily.
CAUTION
Do not turn off GFCI switches or unplug unit immediately
after use. Internal fans must cool oven to avoid damage to
electrical components.
NOTICE
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.
Upper
Chamber
GFCI
Switch
Lower
Chamber
GFCI
Switch
Control
Reset
Switches
“Off”
1. Touch
on each touchscreen
to shut down and allow oven
to cool. Cooling fans will
operate until the oven chamber
temperature drops below
140°F (60°C).
2. After the cooling fans shut off:
a. Move both GFCI switches
on the back of the oven to
the
O
(Off) position.
b. Move both Control Reset
Switches to the “Off” position.
c. Unplug the power cord.
3. Remove and discard any remaining food product.
4. Remove and clean each cooking rack using a damp non-
abrasive cloth or nylon scouring pad (a non-abrasive
cleaner may be used for difficult stains).
5. Remove any spillages using damp paper towel or a non-
abrasive cloth.
6. Wipe down all exterior surfaces using a non-abrasive,
damp cloth (a non-abrasive cleaner may be used for
difficult stains).
7. Wipe dry all surfaces using a non-abrasive, dry cloth.
8. Polish the exterior surfaces of the oven using a good
quality stainless steel cleaner.
9. Reinstall the cooking racks (See INSTALLATION section
for details.
Weekly Cleaning
1. Touch
on each touchscreen to shut down and allow
oven to cool. Cooling fans will operate until the oven
chamber temperature drops below 140°F (60°C).
2. After the cooling fans shut off:
a. Move both GFCI switches on the back of the oven to the
O
(Off) position.
b. Move both Control Reset Switches to the “Off” position.
c. Unplug the power cord.
3. Remove and discard any remaining food product.
4. Remove and clean each cooking rack using a damp non-
abrasive cloth or nylon scouring pad (a non-abrasive
cleaner may be used for difficult stains).
5. Remove any spillages using damp paper towel or a non-
abrasive cloth.
IMPORTANT NOTE
:
Use of cleaning chemicals not approved by Ovention
®
when
cleaning the oven chamber will void the warranty.
6. Carefully spray Chemco Dirt Buster III Oven Cleaner onto
a non–abrasive nylon scouring pad.
NOTE: Do not spray cleaner directly into the oven chamber or into
the fan opening at the rear inside of the oven chamber.
continued...
