Form No. OVMILOM-0718
4
IMPORTANT SAFETY INFORMATION
All Models
Ovention
®
Double MiLO™ ovens are designed to provide
unequaled flexibility in both kitchen and front-of-the-house
installations. The variety of menu options, small footprint,
low heat escape, and hood-less installation make the Double
MiLO™ oven a single solution alternative to multiple pieces of
cooking equipment.
The Double MiLO oven is equipped with two independent
oven chambers. Each oven chamber has upper and lower
infrared (IR) heating elements, a convected air blower, and
a corresponding touchscreen. The upper and lower infrared
elements provide traditional cooking and food finishing from
above and below the food product. The convected air blower
directs heated air through the upper and lower IR element
packs and throughout the inside of the oven chamber for
fast and even cooking. Both types of heat are adjustable in
both duration and intensity by developing/using programmed
recipes on the touchscreen.
Operator controls for each oven chamber consist of a
touchscreen, a GFCI switch, and a Control Reset switch. For
each touchscreen, a dedicated USB port allows the uploading
of pre-programmed recipes, installation of software updates,
and the opportunity for service diagnostics. A single 6′
(1829 mm) cord and plug set is standard.
Any oven-safe pan can be used in the oven chambers of the
Double MiLO oven. Each chamber has a capacity of a standard
1/2 sheet pan or up to a 16″ pizza.
USB Port
Power Cord
Temperature High Limit
Reset Buttons
(on back)
GFCI Switches
(on back)
Control Reset
Switches
(on back)
Touchscreen
Oven Door
Door Handle
Drip Tray
Drip Tray
MODEL DESCRIPTION
NOTICE
Improper cleaning of oven could damage catalyst and will
void unit warranty.
Wear protective rubber gloves and protective eye wear
when cleaning unit.
Do not cover racks or any other part of oven with metal
foil. Airflow restriction will cause oven to overheat.
NOTICE
Do not lay unit on its side in any direction. Damage to unit
could occur.
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.
Clean unit daily to avoid malfunctions and maintain
sanitary operation.
Model Description (Model MilO2-16 shown)
