9
1-2.
Insert the fixed panel’s bottom seal strip (K) at the base of the fixed panel (C). Cut the surplus part with a cutter to
size, about 1 9/16” (40mm) from the panel’s edge.
3.
Place the glass panel clamp (I) and the sliding door guide (Q) on the base. Mark the positions of holes of the glass
panel clamp (I) and sliding door guide (Q).
4.
Drill a pilot hole for the glass panel clamp (I) and sliding door guide (Q) using a ø1/8” (3mm) drill bit.
5-6.
Install the glass panel clamp (I) and sliding door guide (Q) with the screw (DD).
7.
Place the fixed panel (C) into the glass panel clamp (I) and the sliding door guide (Q).
FIXED PANEL INSTALLATION
K
K
C
3
1
I
Q
2
C
K
4
7
1 9/16”
40mm
1 9/16”
40mm
27 1/2”
699mm
9/16” 15mm
ø
1/8”
3mm
5
6
Q
I
Q
C
DD
DD
Helpful Hint
Add a drop of
silicone in the
holes before
inserting the
screws
