16
1.
Install the shelf supports (V) onto the cabinet fixed panel (T)
2.
Place the shelf supports (V1) and the glass shelves (U) to the shelf supports (V).
3.
Mark the outline of the shelf supports (V1) on the wall.
4.
Remove the supports and the glass shelves and drill pilot holes in the marked locations with a ø1/4” (6mm)
drill bit.
5.
Insert the wall anchors (BB) using a rubber mallet until the wall anchors are flush with the wall.
6.
Fix the shelf supports (V1) with screws (FF).
7.
Insert the glass shelves (U) into the shelf supports (V & V1).
CABINET INSTALLATION
1
2
3
BB
5
6
7
ø1/4”
6mm
4
FF
V
V1
U
V1
V1
U
T
V
V