11
SUPPORT BAR INSTALLATION
1-3.
Drill a hole on the center marks with a ø5/16” (8mm) drill bit and insert the wall anchors (AA) using a rubber
mallet. Fix the center fitting on the support bar’s anchor (D) using the screws (CC).
4.
Slide again the roller stoppers (E) and the support bar’s anchors (D) onto the support bar (F). Then fix the support
bar to the wall.
5-6.
Fix the fixed panel (C) onto the support bar (F) using the brackets (G).
Secure the support bar (F) on their
anchors using the provided hex screws.
2
1
CC
3
D
E
F
4
6
5
ø5/16”
8mm
AA
C
G
F
