22.
Complete both Narrow Wall attachments making sure 2x3 wall framing is flush with floor
joists and plywood and siding of wall is overhanging the floor by approximately 1/2”.
23.
There are 2 - 6 1/2” Door Header End Plates. Align dado cut on top facing outward and flush to
inside of wall framing. Attach each with 2 - 2 1/2” screws as illustrated above.
24.
Position Door Header - (78”long) with dado cut facing outwards between End Plates. Push
walls together so joints are tight together. Secure Header to Narrow Wall framing with 2 - 2 1/2”
screws per side.
Sits flush with inside
of wall framing
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 11
Make sure joints are
tight. Push walls in if
required.
Dado cut facing to the
top and outwards.
