Ouring 3D TALK DS200, Руководство пользователя

Страница: 10 / 54

Jiangsu Ouring 3D Technology co.,Ltd
10
printer resin vat, this function can be used to cure the resin at the bottom of the
vat, solidify the impurities and remove the cured resin.

[Operation Control] Controls the Z-axis of the printing build plate to move up &
down and return to zero.
Note:
The bottoming operation in
Operation Control
must confirm that there is no solid
impurities inside the printing build plate and resin vat. It can be operated after being
leveled

[Light Path Control]
[Water Cooled Switch] Manually turn on the water-cooling system of the printer
[Light board switch] manually open the LED light board
[Preset Image] Calibrate the light intensity pattern
[Full Screen Image] Check whether the screen is damaged or not

[Setting]
[Administrator Login] Enter the parameter login password: 123456
[Parameter] User can set the printing parameters in printer (draw
“√”
in
[Parameter Settings] and save, the model file will be printed according to the
parameters of this page, and the printing parameters set in the software will be
invalid.)
[Parts Replace] Count the use time of the lamp board and screen. When it needs to
be replaced, please click the corresponding button to time the parts.
[Light Calibration] Calibrates the light intensity of the light board.