Ouring 3D TALK DS200, Руководство пользователя

Страница: 14 / 54

Jiangsu Ouring 3D Technology co.,Ltd
14
2. Manually rotate the four units hand screw on the Z-axis bracket counterclockwise
to the highest position (See below picture)
If the hand screw cannot be rotated counterclockwise, please hold the printing build
plate, loosen the locking handle and then try to rotate.
3. After the hand screw is rotated, please be sure to position each positioning pin
and the positioning hole, tighten the locking handle to make sure that the printing
build plate is not shaken.
Warning: Do not turn the locking handle counterclockwise to prevent the printing
build plate from falling off and damaging the printer.