Ouring 3D TALK DS200, Руководство пользователя

Страница: 49 / 54

Jiangsu Ouring 3D Technology co.,Ltd
49
2. Remove the screws at the bottom of the vat with a screwdriver, take out the lower
die frame and release film, and remove the residue in the die frame clean up
3. Lay the new release film and press die frame on the bottom of the vat and use the
original screw to press evenly (Screw away One-time fastening)
4 Release film compression, use wallpaper knife around the excess release film paper
cut off
5. Pour a little clean water into the material vat for leakage test. After detecting no
leakage point, pour out the water and dry it with a dust-free clean vat
6. Complete vat release film replacement. (Printing of the model in the same position
on the build plate for a long time frequently will cause the release film to be blurred,
so as to ensure the printing quality and success. When printing every time, please do
not frequently print in the same location)
Solution B:
1.Replace the whole set of vat (including vat+ release film) (If you want to know
details, please contact the sales representative and the manufacturer's after-sales
staff)
Resin vat
7. Printer use instruction
Thank you for choosing 3DTALK-DS200 3D printers. In order to keep the printer
running normally, please make sure to spend time on read product tips for future