Ouring 3D TALK DS200 Скачать руководство пользователя страница 4

Страница: 4 / 54

Jiangsu Ouring 3D Technology co.,Ltd

Note: Wear appropriate protective printer to avoid contact with resin. For example:

goggles, masks, protective gloves.

Note: Do not pour waste resin into the bottle and sink to avoid contaminating the

intact resin in the bottle and clogging the sewer, please place the waste resin in a

plastic bag and discard it in the sun after cured.

Note: For unrecoverable problems, please contact the factory after-sales staff or

sales representative.

Warning: Do not place objects on the top of the printer to avoid falling into the

printer and causing printing problems and safety hazards.

Warning: Keep the printer, resin, and alcohol away from fire.

Warning: Please use the power cord that comes with the printer, and ensure that the

power supply voltage is stable. The live, neutral, and ground wires are properly

connected properly, otherwise the printer may be damaged.

To ensure safety, kindly operate the printer carefully. Read and follow all safety

precautions described in the precautions.

Содержание 3D TALK DS200























































Результаты поиска

Содержание 3D TALK DS200

Отзывы:

Похожие инструкции для 3D TALK DS200

Бренды по названию

Популярные бренды

Ouring 3D TALK DS200, Руководство пользователя

Результаты поиска

Содержание 3D TALK DS200

Отзывы:

Похожие инструкции для 3D TALK DS200

Бренды по названию

Популярные бренды