Ouring 3D TALK DS200 Скачать руководство пользователя страница 47

Страница: 47 / 54

Jiangsu Ouring 3D Technology co.,Ltd

the material inside being cured.

1. After putting the printing build plate in place, the post-processing operation of

the model is started

2. Leave trees on the surface of the model placed in the cleaning vat with alcohol

(90-95%) and soft bristle brush. The grease is cleaned off, and then the ultrasonic

cleaning printer is used for secondary cleaning

(The second cleaning time is determined by the power of the ultrasonic cleaning

printer 35w-90s. If not equipped with ultrasound cleaning machine, clean with

alcohol and soft bristle brush carefully)

Soft brush + cleaning vat

ultrasonic cleaning printer

3. Place the model in a ventilated place after cleaning, or use a blower to dry the

surface alcohol of the model;

4. Place the air-dried model in a UV curing box for secondary curing.(curing time

depends on the UV used. The power of the curing box varies, 30w-240s.If not

equipped with UV curing box, the model can be placed in the sun. Let it dry for

10-15min.)

Clean up impurities in the vat

After the model post-processing is completed, the release film along the bottom

surface of the vat shall be checked for residue through the plastic scraper solid

impurities, if present, please clean up immediately. If there are many solid

Содержание 3D TALK DS200























































Результаты поиска

Содержание 3D TALK DS200

Отзывы:

Похожие инструкции для 3D TALK DS200

Бренды по названию

Популярные бренды

Ouring 3D TALK DS200, Руководство пользователя

Результаты поиска

Содержание 3D TALK DS200

Отзывы:

Похожие инструкции для 3D TALK DS200

Бренды по названию

Популярные бренды