OUMAN EH-203, Руководство пользователя

Страница: 42 / 85

OUMAN EH-203 OUMAN EH-203 OUMAN EH-203 OUMAN EH-203
Press the button to move cursor to "Clock functions”. Press OK.
Clock programs - browsing, adding, deleting
19:30
00:00
_ _ _ _ _ _ _
DropOnH1
Drop Off
MoTuWeThFr_ _
19:30
_ _ _ _ _ _ _
DropOnH1
MoTuWeThFr_ _
Drop Off 04:30
19:30
_ _ _ _ _ _ _
00:00
_ _ _ _ _ _ _
DropOnH1
Drop Off
Clock functions
Time/ Date
H1 drop program
H2 drop program
R1 time program
R2 Control
HW temp.incr.
MoTuWeThFr _ _
04:30
00:00
_ _ _ _ _ _ _
00:00
_ _ _ _ _ _ _
etc.
Drop Off
DropOnH1
Drop Off
MoTuWeThFr _ _
Press the button to move cursor to the regulating circuit (or relay control
circuit) whose time controls you want to access (browse, add or delete).
Press
OK. Relay time control is in use when the relay in question is
reserved first for time or time/outdoor temperature control (see p. 26-27)
HW increase is in use when the amount of the HW increase has been set
in the special maintenance mode, (see p. 23)
Set the start time for the temp. drop program: OK.
OK.
OK.
- +
- +
Press
Temperature drop start time hours blink.
the or button to set hours. Press
Minutes blink. the or button to set minutes. Press
Press
Press
Set the weekdays (when the start time is effective):
OK
OK.
- +
-
Press the or button to select weekday.
The day is left unselected/ press the -button to delete the selection.
The selection shown on the display is taken into use with the button.
Make your selection for each day and press
Set the end time for the temp. drop program: OK.
OK.
OK.
- +
- +
Press
Hours blink. the or button to set hours. Press
Minutes blink. the or button to set minutes. Press
Press
Press
Set the weekdays (when the end time is effective):
OK
OK.
+
-
Press the button to select weekday.
The day is left unselected/ press the to delete the selection.
The selection shown on the display is taken into use with the button.
Make your selection for each day and press
19:30
_ _ _ _ _
_ _
04:30
_ _ _ _ _ _ _
DropOnH1
Drop Off
Browse/ location for additional programming:
the button to browse the clock programs which have been
made. If you want to make additional programs, move cursor to first
empty program block.
Press
H1 Select
Heating curve
Settings
Measurements
Info water temp
DH Energy meas.
Control modes
Clock functions
Type info
Press ESC until the display no longer changes.
You are then in the "Selection" display shown in the adjoining picture.
OPERATING INSTRUCTION:
Press OK.
KV
Ulkol. °C
Menovesi °C
Valinta
Automaattiohj
L2
Ulkol. °C
Menovesi °C
Valinta
Automaattiohj
KV
Ulkol. °C
Menovesi °C
Valinta
Automaattiohj
L2
Ulkol. °C
Menovesi °C
Valinta
Automaattiohj
KV
Ulkol. °C
Menovesi °C
Valinta
Automaattiohj
L2 Automaattioh j
HW Automatic
H2 Automatic
You can delete the program block inside the brackets by deleting the
weekdays in that program block with the
button.
DELETING THE PROGRAM BLOCK:
-
1. Drop the temp. for certain lengths of time (heat. circuits H1 and H2)
2. Increase the domestic hot water temp. (anti-bacteria function)
3. Time control the desired on/off connections with two relays (eg.
ventilator, outdoor lights, sauna stove, outside doors, see p. 15).
With the freely programmable 24 hour/7 day clock you can:
There is always one program block inside the brackets (drop on and off).
The cursor moves to the beginning of the next program block (new brackets).
Continue programming as before or exit with
In the example the drop is in effect during the workweek between 19:30 and
4:30. On the weekend the drop begins on Friday evening at 19:30 and
ends on Monday morning at 4:30.
ESC.
H1
Outdoor °C
SupplyTemp °C
Selection
Automatic
-15
52
14
19:30 Incr
_ _ _ _ _
_ _
04:30 Incr
_ _ _ _ _ _ _
OnHW
Off
HW temp.incr. Domestic hot water increase program:
Clock programming occurs in the same way as the temperature drop
clock program.