Otto Bock C1000 DS, Инструкция по эксплуатации

Страница: 29 / 124

29
Steps:
1. Remove the cover from the controller (see Section 6.6).
2. Disconnect the battery cable from the controller.
3. Open the cable ties.
4. Remove the battery cable and replace if required.
Properly reassemble all components upon completion of the work.
fig. 16 Battery cable
6.4 Replacing the charging receptacle
INfORMATION
When connecting the cables, ensure correct assignment.
Preparation:
❒
Turn the control unit off.
❒
Remove the fuse (see Section 6.2).
❒
Remove the battery cover (see Section 6.3.2).
❒
Remove the batteries (see Section 6.3.3).
Tools:
❒
Open-end or combination wrench, size 11
❒
Small Phillips screwdriver
❒
Side cutting pliers
Steps:
1. Loosen the charging receptacle cables on the controller.
2. Loosen the charging receptacle cables on the batteries.
3. Open all cable ties on the charging receptacle cable between the controller and batteries.
4. Loosen the two pan head screws on the front of the charging receptacle.