92
Seat height table XXL 2
Posterior seat height (in cm),
measured without seat cushion and with 0° seat inclination
Anterior seat height (in cm),
measured without seat cushion and with 0° seat inclination
Mounting
positions
Rear wheel size/tires
24“
26“
1
40
42
2
42,
44,
44,
46,
4
47
49
49
1
6
1
1) Combination is not possible.
Important:
Between the front and rear axle position, the axle can be adjusted horizontally in 7 positions (A to G). Position A allows a passive center of
gravity, whilst in position G, the most active center of gravity is reached.
If no indication for the desired rear wheel position is made, it will be factory-mounted in position D/ 4. Seat inclination: 10 cm maximal seat height
difference between anterior seat height and posterior seat height (corresponds to a seat inclination of approx. 1°).
Note: Without indication of the desired seat inclination, it will be factory-set at approx. 4°.
The values indicated are measurements which have been theoretically determined. Not all adjustment possibilities can be used for all
wheelchair models. Further, the adjustment combinations are limited due to the frame geometry. We reserve the right to technical alterations
and tolerances.
The posterior seat height
is
dependent on the
selected wheel size and mounting position in the rear
wheel attachment device. Please refer to the seat
height table!
Position
Caster diameter
140 mm
7“
8“
Caster fork short
Position 4
Position
Position 2
Position 1
1)
1)
4
47
1)
1)
1)
49
1)
1)
1)
1)
Caster fork long
Position 4
Position
Position 2
Position 1
47
48
49,
0,
49
0
1,
2,
1)
1
2,
,
The anterior seat height
is dependent on the selected wheel size,
caster fork, and mounting position. Please refer to the seat height
table!
