Otto Bock 743A250, Инструкция по эксплуатации

Страница: 15 / 56

4.5 Charging switched off sensors in the base station and switching them on prior to
measuring
11
► : Check whether all the LEDs on the base station are illuminated ( : Power LED; : WLAN LED; : Sys­
tem status LED).
►
: NOTICE! Only charge switched-off sensors in the base station. Refer to the ambient temperature for char­
ging in the “Technical data” (see Page 49) section under the “Ambient conditions” heading.
INFORMATION: The charging time for the sensors is approx. 4 hours.
: Switch on the sensors with a fine-tip pen or a similar pointed tool or object prior to measuring.
Meaning of the base station LED signals
LED signal : Power LED : WLAN LED : System status LED
Not illuminated No power supply connected
Illuminated Power supply connected WLAN connection to router
established Boot process completed,
base station ready
Flashing slowly WLAN connection to router
interrupted, base station set­
ting up own WLAN network
Flashing quickly WLAN connection to router
being established Base station booting
Meaning of the sensor LED signals
LED signal Meaning
Not illuminated Sensor switched off or completely discharged
Illuminated (white) No WLAN connection
Modulating (blue) Charging and connected to base station via WLAN
Flashing (yellow) Update being installed – do not switch off and do not remove
from base station!
15 743A250 Bionic Pro
Preparing product for use