Otto Bock 490E75 Series, Руководство по обслуживанию

Страница: 106 / 164

Service work
490E75=0_C 106 | Ottobock
224
Required spacer washers
INFORMATION
Always use metal spacer washers if possible.
The information in the table refers to the respective spacer washer thickness. If additional components are at-
tached to the seat, additional or different mounting elements may be needed.
Always choose the spacer washers so that no parts are canted or bent. For further information, please contact your
national Ottobock team.
Seat
depth
[cm]
Standard seat (small) Standard seat (large/XL)
Front distance
(see Fig. 225, item 1)
Rear distance*
(see Fig. 213, item 2)
Front distance
(see Fig. 212, item 1)
Rear distance*
(see Fig. 213, item 2)
38 8.5 mm 5.0 mm Seat depth not allowed Seat depth not allowed
40 8.5 mm 5.0 mm Seat depth not allowed Seat depth not allowed
42 8.5 mm 5.0 mm None 3.0 mm**
44 8.5 mm 5.0 mm None None
46 8.5 mm 8.5 mm 3.0 mm None
48 Seat depth not allowed Seat depth not allowed 3.0 mm None
50 Seat depth not allowed Seat depth not allowed 3.0 mm 3.0 mm
* Installation under the axle (see Fig. 213, item 3)
** Installation under the farthest rear bore of the adaption (see Fig. 220, item 2)
225 226