Otto Bock 490E75 Series Скачать руководство пользователя

Страница: 154 / 164

R-Net wheelchair control

490E75=0_C

154 | Ottobock

Parameter

Setting range Description

Standby Right

Drive, seat,

Bluetooth,

external de-

vices, mode 5,

mode 6, IR

mode, pro-

gramming

Used to set which mode is switched to if the joystick is moved to the right

when the system is in standby mode. Please note that Mode select in standby

must be set to Yes in order for this function to be active.

Remote Selec-

tion

Yes, no

Used to set whether profiles or modes can be selected and input using joy-

stick movements.

Setting the parameter to Yes makes it possible to switch from a profile into

the remote selection mode. The remote selection mode can be reached via

standby mode, the profile button or an external input device for the profile.

The profile can also be selected from the remote selection mode.

If the parameter is set to No, it is not possible to access the remote selection

mode from the profile and the profile cannot be selected from the remote

selection mode either.

Background

Blue, white

Background colour of the LCD display for the individual profiles. Standard

setting is blue.

7.4.5 Latched drive parameters

The following parameters can be set under Latched:

Parameter

Setting range Description

Latched Drive

Off, Step, Step

reverse, Cruise,

Cruise reverse

Type of latched drive mode:

• Off: Latched drive mode is switched off.

• Step: Step mode in the forward direction only. Driving in step mode me-

ans that the latched speed of the wheelchair is increased or decreased

using short joystick movements.

• Step reverse: Step mode in both the forward and reverse direction

• Cruise: Cruise mode in the forward direction only. Joystick movement

accelerates the wheelchair and driving continues at the speed reached

when the joystick is released.

• Cruise reverse: Cruise mode in both the forward and reverse direction.

If Latched drive is set in a profile, an emergency stop switch must be con-

nected to the socket for the external input device for the profile on the joystick

module.

Latched Actua-

tors

Yes, no

Operation of seat functions in latched mode, i.e. the seat function is trigge-

red with a short joystick movement. If Latched actuators is set in a profile, an

emergency stop switch must be connected to the socket for the external input

device for the profile on the joystick module.

Latched Timeout 0 to 250 s in

single steps

Timeout for driving and operation of the variable motors in latched mode.

The timeout period is the maximum period of time for which the joystick can

remain in the neutral position before movement in latched mode is ended. If

the period of time is exceeded, movement in latched mode stops. Timeout

is therefore an important safety function with which driving or movement of

a variable motor is stopped when the user is unable to stop the functions as

usual. It is important that the correct duration is set for the timeout.

When a value of 2 or lower is set, the timeout function is disabled. This

should only take place in exceptional cases and following a comprehensive

risk analysis.

Latched Timeout

Beep

Yes, no

A beep is emitted shortly before expiration of the timeout period.

Содержание 490E75 Series





































































































































































Результаты поиска

Содержание 490E75 Series

Отзывы:

Похожие инструкции для 490E75 Series

Бренды по названию

Популярные бренды

Otto Bock 490E75 Series, Руководство по обслуживанию

Результаты поиска

Содержание 490E75 Series

Отзывы:

Похожие инструкции для 490E75 Series

Бренды по названию

Популярные бренды