otometrics AccuScreen ABR Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 110

background image

Otometrics

85

Maintenance and Cleaning

Eartips

Calibration frequency

The probe should be calibrated annually by factory authorized service personnel.

11.2

Eartips

Eartips are disposable and should not be cleaned.

Note ·

Eartips should be disposed of according to local regulations.

11.3

Cleaning the ear coupler cable

Always mount the ear couplers on the ear coupler adapters before use to prevent the
ear coupler adapters from coming into contact with the patient. The ear couplers are
disposable items and should be used only on one patient.

If there is a risk of cross-infection, clean the adapters. Otherwise, clean the adapters
at the end of the day:
1. Disconnect the ear coupler cable from AccuScreen.

Caution ·

Never immerse the ear coupler cable in liquid.

2. Use a wet tissue with alcohol to clean the ear coupler cable and the ear coupler

adapter. Wipe only with disinfectants and make sure that liquid does not enter
the ear coupler adapter.

11.4

Cleaning AccuScreen

• Before cleaning, switch off AccuScreen and unplug it from any external power

source.

• Unplug the probe from AccuScreen.

Caution ·

Use only wiping disinfectant.

Caution ·

Always make sure that no moisture enters the probe, the sockets (data interface

connector and probe plugs) or the test cavity.

Caution ·

Never immerse AccuScreen into water or other cleaning solutions.

• Clean AccuScreen with a moist cloth - if required, use a little surface disinfec-

tant.

11.4.1

Cleaning and disinfecting the test cavity

If needed, use a wet tissue with alcohol to clean the entry surface of the test cavity.

«
...
83
84
85
86
87
...
»

Содержание AccuScreen ABR















































































































Отзывы:

Нет отзывов

Похожие инструкции для AccuScreen ABR

Бренд: Datalogic Страницы: 32

Бренд: Datalogic Страницы: 452

Бренд: Oce Страницы: 42

Бренд: Kodak Страницы: 121

Бренд: i.safe MOBILE Страницы: 76

LSA-10A-30-D-130

Бренд: Harmonic Drive Страницы: 33

Бренд: AGFA Страницы: 81

Бренд: Genius Страницы: 30

Бренд: Genius Страницы: 37

Бренд: Ambir Страницы: 12

Бренд: Datalogic Страницы: 16

Бренд: EMSCAN Страницы: 85

Бренд: Banner Страницы: 135

USB COLOUR FLAT BED SCANNER

Бренд: Medion Страницы: 30

UNITEST Wallscanner

Бренд: BEHA Страницы: 32

Бренд: SmartPro Страницы: 29

SmartOffice PL4080

Бренд: Plustek Страницы: 39

Бренд: Plustek Страницы: 59

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды