OPERATION SETTINGS
OI-6000K-X-X-X-NXP-X OPS_GUIDE_REV 1.0
36
4
OPERATION SETTINGS
At the time of installation, when the power is first applied to the OI-6000K, the unit is automatically powered on
and begins the startup sequence. During the 1-minute warmup, the display will show a countdown of the time
remaining until the system start-up is complete. The Otis logo and the unit information will also flash on the
display screen and, at the end of the countdown, the device will be in normal operating mode.
4.1
POWERING THE DEVICE
4.1.1
POWERING OFF
Powering off the device stops the operation of the unit. The product settings and configuration,
as well as the operation settings, including the null and calibration of the sensor, will be
unaffected.
1.
Press and hold
the
SUB
button for approximately 6 seconds, until “OFF” shows on the dis
play
screen.
The display screen will cont
inue to show “OFF” for the duration of time that the unit is powered
off, as long as long as uninterrupted power is supplied to the unit.
4.1.2
POWERING ON
Powering on the device begins the operation of the unit, automatically initiating the system start-
up cycle and 1-minute warmup period. The OI-6000K will be in normal operating mode at the
completion of the system start-up.
1.
Press
the
ADD
button once to turn the unit on.
Содержание OI-6000K NXP Series
Страница 1: ......
Страница 2: ......
Страница 67: ...APPENDICES OI 6000K X X X NXP X OPS_GUIDE_REV 1 0 62 Notes ...