Parts List & Operating Instructions
511555 (6020) Ford Camshaft Positioning Tool
Note: Tool No. 511555 (6020; same as Ford No. 303-413/T92P-6256-A) must be used with tool
No. 511532 (6009; same as Ford No. 303-380/T91P-6256-A).
CAUTION: To prevent damage to valves and pistons, DO NOT rotate the crankshaft and/or camshaft(s)
when removing the timing chain(s) and installing the cylinder heads. Because this is not a free-wheeling
engine, if it has "jumped time" there will be damage to the valves and/or pistons, which will require the removal
of the cylinder heads. The cam sprocket should be disassembled from the camshaft only when one of the
components must be replaced.
1. Remove all necessary components to access the timing chains.
2. Rotate the engine to No. 1 top dead center.
3. Disassembly: Install Camshaft Positioning
Tool (511555/6020) and Cam Positioning Tool
(511532/6009) into each camshaft end, as
shown, before removing timing chain tensioners
and chains to prevent valve train damage.
4. Assembly: Install Camshaft Positioning Tool
(511555/6020) and Cam Positioning Tool
(511532/6009) into each camshaft end, as shown,
before installing timing chains and tensioners to
prevent valve train damage.
No. 511532 (6009)
Ford Camshaft
Positioning Tool
No. 511555 (6020)
Ford Camshaft
Positioning Tool
Application: 1992 – 2008 4.6L 2V Crown Victoria (V8), Grand Marquis
1997 – 2002 4.6L Crown Victoria, Expedition, Explorer
Grand Marquis, Town Car (VIN W)
1997 – 1998 4.6L & 5.4L V8, 6.8L V10 Econoline
1997 – 2012 4.6L Econoline (VIN W)
1997 – 2002 5.4L Expedition
1997 – 2004 4.6L F-150 (VIN 6)
1997 – 2010 4.6L F-150 (VIN W)
1997 – 1998 4.6L F-Series Truck
1997 – 2002 5.4L F-Series Truck
1997 – 2005 4.6L Mountaineer (VIN W)
1997 – 2002 4.6L Mustang (VIN W)
1996 – 2004 4.6L Mustang (VIN X)
2003 – 2004 4.6L Mustang (VIN Y)
1998 – 1999 5.4L Navigator
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.
