511541 (6474) Ford Camshaft Alignment Tool
Application: 1994 – 2002 2.0L 4 cyl. Contour, Mystique (VIN 3)
1999 – 2002 2.0L Cougar (VIN 3)
2012 – 2014 2.0L Edge, Explorer (VIN 9)
2001 – 2004 2.0L Escape (VIN B)
2013 – 2014 2.0L Escape (VIN 9), Fusion, MKZ, Taurus
2005 – 2008 2.3L Escape, Mariner (VIN Z)
2009 – 2014 2.5L Escape (VIN 7)
2005 – 2008 2.3L Escape Hybrid, Mariner Hybrid (VIN H)
2009 – 2012 2.5L Escape Hybrid, Mariner Hybrid (VIN 3)
2012 – 2014 2.0L Focus (VIN 2)
2000 – 2004 2.0L Focus (VIN 3)
2002 – 2004 2.0L Focus (VIN 5)
2005 – 2012 2.0L Focus (VIN N)
2003 – 2007 2.3L Focus (VIN Z)
2006 – 2009 2.3L Fusion, Milan, MKZ, Zephyr (VIN Z)
2010 – 2014 2.5L Fusion (VIN A)
2010 – 2014 2.5L Fusion Hybrid (VIN 3)
2009 – 2012 2.5L Mariner (VIN 7)
2010 – 2011 2.5L Milan
2010 – 2012 2.5L Milan Hybrid, MKZ Hybrid (VIN 3)
2014 2.0L MKT
2012 2.0L MKX (VIN 9)
2010 – 2012 2.5L MKZ (VIN A)
2001 – 2011 2.3L Ranger (VIN D)
2010 – 2013 2.0L Transit (VIN N)
CAUTION: The Camshaft Alignment Tool is for
camshaft alignment only. Using this tool to
prevent rotation can result in engine damage.
1. Rotate engine to top dead center on the No. 1 cylinder.
2. Align camshafts by installing tool No. 511541 (6474) into the slots at the rear of the camshafts as shown.
3. Service the timing belt as required according to instructions in the vehicle service manual.
4. Torque fasteners to factory specifications.
5. Remove the tool.
No. 511541
(6474)
Note:
•
Same as Ford No. 303-465 (T94P-6256-CH).
•
The camshaft timing slots are offset. If the
camshaft alignment timing tool cannot be installed,
rotate the crankshaft one complete revolution
clockwise to correctly position the camshafts.
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.
