Parts List & Operating Instructions
511542 (6475) Ford Crankshaft TDC Timing Pin
Application: 1997 – 2002 2.0L 4 cyl. Contour, Mystique (VIN 3)
1999 – 2002 2.0L Cougar (VIN 3)
2012 – 2014 2.0L Edge, Explorer (VIN 9)
2001 – 2004 2.0L Escape (VIN B)
2013 – 2014 2.0L Escape (VIN 9), Fusion, MKZ, Taurus
2012 – 2014 2.0L Focus (VIN 2)
2000 – 2004 2.0L Focus (VIN 3)
2002 – 2004 2.0L Focus (VIN 5)
2005 – 2011 2.0L Focus (VIN N)
2014 2.0L MKT
2010 – 2012 2.0L Transit (VIN N)
CAUTION: To prevent damage to the engine, remove the No. 511542 (6475) timing pin from the engine
and reinstall the access plug BEFORE cranking the engine.
1. Rotate crankshaft to set No. 1 cylinder on TDC of compression stroke.
2. Remove the access plug from the engine and install tool No. 511542 (6475) timing pin as shown. (The
pin will completely thread into the hole when the engine is at TDC on the No. 1 cylinder.)
3. Service the timing belt as required according to vehicle service manual procedures.
4. Torque fasteners to factory specifications.
No. 6475
(511542)
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.
