511552 (6484) Ford Timing Chain Tensioner Tool
Application: 1997 – 2011 4.0L SOHC Explorer (V6), Mountaineer (V6), Ranger (VIN E)
1997 – 2008 4.0L SOHC Explorer, Mountaineer, Ranger (VIN X)
2005 – 2010 4.0L SOHC Mustang (VIN N)
511553 / 511554 (6485) Ford Camshaft
Gear Bolt Socket Extension
Application: 1997 – 2011 4.0L SOHC Explorer (V6), Mountaineer (V6), Ranger (VIN E)
1997 – 2008 4.0L SOHC Explorer, Mountaineer, Ranger (VIN X)
2005 – 2010 4.0L SOHC Mustang (VIN N)
2003 – 2011 4.0L SOHC Ranger
1. Remove the hydraulic chain tensioner from the
engine.
2. Install tool No. 511552 (6484) into the engine to
hold pressure on the timing chain during the cam
timing procedure.
3. Adjust camshaft timing according to instructions
in the vehicle service manual.
4. Torque fasteners to factory specifications.
Note: Same as Ford No. 303-571 (T97T-6K254-A).
No. 511552
(6484)
1. Assemble the No. 6485 (511553 & 511554) socket and
extension on the camshaft gear bolt as shown.
Removal: Use a ratchet or breaker bar to loosen and remove
the bolt from the camshaft.
Assembly: Use a torque wrench to tighten the bolt on the
camshaft. Refer to the vehicle service manual for the correct
torque specifications.
No. 511554
Extension
No. 511553
Camshaft Gear
Bolt Socket
No. 6485
(511553 & 511554)
Note: 511553 is the same as Ford No. 303-565 (T97T-6256-G)
and 511554 is the same as Ford No. 303-575 (T97T-6256-F).
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.
Shop the largest selection of reliable automotive tools in our online store.
