![background image](http://html1.mh-extra.com/html/oster/blend-n-go/blend-n-go_user-manual_1656949011.webp)
11
Blending Tips
Liquids
Put liquids into the jar first, unless the recipe says otherwise. Add more liquid if
ingredients are not blending properly.
Using the Filler Cap
Do not remove the lid while in use. Instead, open the filler cap to add smaller
ingredients.
Ice Crushing
Without Liquid: use pulse button until you achieve desired results.
With Liquid: Add desired amount of ice cubes and water until ice floats. Blend
on High until you achieve desired results then strain off water.
Working with Hot Foods or Liquids
WARNING:
When you work with HOT FOODS, remove the filler cap to
vent steam. Tilt the lid away from you partially covering the opening. Keep
hands and other exposed skin away from the lid opening to prevent
possible burns.
WARNING:
When you work with HOT LIQUIDS, remove the filler cap and
start at a low speed, and then gradually increase to a faster speed. Do not
add liquid over the 4 cup (1L) level. Always keep hands away from steam.
Ingredient Quantities
Use only the amount of food suggested in the recipes. If you want greater
amounts, prepare in batches. Using larger amounts may overload and strain
the motor. You might also get different results from those described.
Frequently Asked Questions
Why doesn’t the blender turn on?
• Make sure the base is plugged in an active power receptacle.
• Verify blinking blue light is active after pushing on/off button.
How can I prevent liquids from leaking out?
Check to see that the sealing ring is correctly assembled in between
the blade and the jar.