Ossila Dip Coater
User Manual
ossila.com
9
Ossila Limited © 2017
3.4
General Hazards
Before installing or operating the Dip Coater, there are several health and safety precautions which
must be followed and executed to ensure safe installation and operation.
WARNING: Improper handling when operating or servicing this equipment can result in serious
injury. Read this manual before operating or servicing this equipment.
I.
CAUTION: During operation, the movement of the clamping arm could result in a
pinch point hazard. Caution should be taken whenever the system is in operation.
3.5
Power Cord Safety
I.
Emergency power disconnect options: Use the power cord as a disconnecting method
and remove it from the power source. To facilitate disconnect, make sure the power
outlet for this cord is readily accessible to the operator.
3.6
Servicing
If servicing is required, please return the unit to Ossila Ltd. The warranty will be invalidated if:
Modification or service has taken place by anyone other than an Ossila engineer.
The Unit has been subjected to chemical damage through improper use.
The Unit has been operated outside the usage parameters stated in the user documentation
associated with the Unit.
The Unit has been rendered inoperable through accident, misuse, contamination, improper
maintenance, modification or other external causes.
3.7
Health and Safety
–
Installation
I.
Pinch points are present during operation of the dip coater. As a precaution, users
should avoid handling or leaning over the equipment during operation in order
to avoid possible crushing or entanglement of hair and/or clothing.
3.8
Health and Safety
–
Servicing
I.
Servicing should only be performed by an Ossila engineer. Any modification or
alteration may damage the equipment, cause injury, or death. It will also void your
equipment’s warranty.
