Ossila Dip Coater
User Manual
ossila.com
8
Ossila Limited © 2017
3.
Safety
3.1
Warning
3.2
Use of Equipment
This Dip Coater is designed to be used as instructed, it is intended to be used under the following
conditions:
•
Indoors in a laboratory environment (pollution degree 2)
•
Altitudes up to 2000 m
•
Temperatures of 5°C to 40°C; maximum relative humidity of 80% up to 31°C.
The Dip Coater is supplied with a 24VDC power adapter with a power cord for the country of purchase,
(in accordance with European Commission regulations and British Standards). The use of any other
electrical power cables, adaptors, or transformers is not recommended.
3.3
Hazard Icons
The following symbols can be found at various points throughout this manual. Note and read each
warning before attempting any associated operations associated with it:
Table 3.1
Hazard warning labels used in this manual.
Symbol
Associated Hazard
General warning or caution, which accompanying text will explain
Electrical shock
Pinch point
Warning
•
Only use the 24V power adapter and power cord supplied with the unit.
•
If using flammable or hazardous solvents, users are expected to be trained in their usage
and carry out a COSHH risk assessment.
•
Keep the area around the machine clear, approximately a 150 m clearance above and 150
cm to the sides and behind.
•
Keep clear of the machine while it is in operation.
•
If using hazardous solvents always use within a fume hood or controlled environment.
•
Pinch points when in operation, keep hands clear of moving parts.
•
Do not use in an explosive atmosphere
