OSS 4UP 10-SLOT GEN4, Руководство по установке

Страница: 65 / 69

One Stop Systems
4U Pro 10 Slot 65
450 Watts Two eight-pin conn one six-pin connector
*May optionally use one eight-pin connector instead
GPU Card Power Connectors
Pin 6-pin 8-pin
1 12V 12V
2 12V 12V
3 12V 12V
4 GND SENSE1
5 SENSE GND
6 GND SENSE0
7 -- GND
8 -- GND
Example below, when using a GPU card that has a maximum power consumption of 300 Watt. It has an 8-pin and 6-pin power connectors.
Number of Pins Watt
6 pin connector provides 75 Watts
8 pin connector provides 150 Watts
To provide additional power, you need two 6+2pin cable connectors, see Figure A.
Note:300 Watt power needed = 75 Watt from PCIe slot + 75 Watt from 6-pin + 150 Watt from 8-pin.
Figure B shows the wrong power cable to use due to special keying on the eight-pin connector. The GPU power connector has a different
keying to prevent interchanging with the +12 V power connectors.
NOTE: We do not provide different aux power cables (i.e. 8pin to 4pin Molex) other than what we offer. If your PCIe card requires a different
power adapter or aux power cable, you would have to buy it from other electronic stores.
16.13 Expansion Unit Power Consumption
The EB4400 expansion unit draws a maximum of 304 Watts ( 2 Fans + 1Bac 1Interface board + IPMI board ) of power without any boards
/ cards installed.
16.14 Power consumption breakdown per hardware
Item Hardware Power Consumption
1 Target Card OSS Gen 4 60 Watts
2 Fans 88.80 Watts (44.40 Watt per fan)
3 Backplane 150 Watt per backplane