OSS 4UP 10-SLOT GEN4, Руководство по установке

Страница: 40 / 69

One Stop Systems
4U Pro 10 Slot 40
13 Verify HIB Device
This sections contains information on how to check / verify the OSS devices on Linux and Windows OS environments.
13.1 Linux OS
To check if the OSS HIB cards and backplane are detected, use the following commands on the terminal window. Make sure you are logged-in
as “super user (or as root)” when running the lspci command.
•
#lspci – tv | grep c010.
The c010 is the Device number of the OSS hardware.
The output below gives you a tree-like structure of the PCI Device B/D/F numbers of b8:00.0 and bd:00.00 (B=Bus number. D=Device number.
F=Function number).
The /B/D/F numbers will vary from system to system .
When the OSS HIB cards and backplane are detected, you should see three instances of devices enumerated, see photo below. If you are only
seeing one device, the host card is not linking up with the target device.
•
#lspci – vvv | grep c010.
The output below shows that the operating system is recognizing the OSS Host card, Target card and
backplane.
The output below shows that the operating system is only detecting the Host card. No link between Target card and Host card.