One Stop Systems
4U Pro 10 Slot
23
7
GPU / PCIe Cards Installation
This chapter provides information on how to install GPU cards or PCIe cards into your One Stop Systems expansion chassis. More details on the
installation of individual cards are provided by the card’s manufacturer.
Install or plug your PCIe cards in the downstream PCIe slot. There are 5 available slots and one Upstream slot.
•
Slot 0
is the Upstream slot (aka: Target Slot)
•
Slots 1, 2, 3
and
4
are downstream slots.
•
Slot 5
is an option slot. Configurable to upstream or downstream modes.
o
Downstream mode: Use downstream slot for an end-point device (i.e. video card, Ethernet, sound card and etc).
o
Upstream mode: Use upstream slot for an OSS Gen4 target card only.
IMPORTANT: You need the ARC6 cables attached between the edge of the board and the slot connectors under the backplane. Without those
cables nothing will work in slot 5. For more information on the option slot configuration, you can download the installation guide from the OSS
support website.
Содержание 4UP 10-SLOT GEN4
Страница 1: ...INSTALLATION GUIDE 4UP 10 SLOT GEN4 4UP 10 SLOT Gen4 www onestopsystems com ...
Страница 8: ...One Stop Systems 4U Pro 10 Slot 8 1 5 Dimensions ...
Страница 62: ...Figure A1 Figure A2 One Stop Systems 4U Pro 10 Slot 62 6 2 pin aux power cable and pin outs ...
Страница 69: ...One Stop Systems 4U Pro 10 Slot 69 ...