OSS 4UP 10-SLOT GEN4, Руководство по установке

Страница: 48 / 69

ADM1026 Internal Temperature Sensor
Fan 1 Status
Fan 1 Speed
+3V3 STBY Voltage
+3V3 MAIN Voltage
+5VSB Voltage
+12V Voltage
PSU 1 Input Voltage
PSU 1 Output Voltage
PSU 1 Output Current
PSU 1 Input Power
PSU 1 Output Power
PSU 1 Temperature 1
PSU 1 Temperature 2
PSU 1 Temperature 3
21C
OK
5100RPM
3.3V
3.3V
5.1V
12V
0V
0.9V
1A
0W
1W
24C
29C
28C
Fan 2 Status OK
Fan 2 Speed
5100RPM
Backplane 2 Temperature 1 25C
Backplane 2 Temperature 2 23C
PSU 2 Input Voltage 117V
PSU 2 Output Voltage
11.9V
PSU 2 Output Current 3A
PSU 2 Input Power 68W
PSU 2 Output Power 31W
PSU 2 Temperature 1
28C
PSU 2 Temperature 2 31C
PSU 2 Temperature 3 24C
One Stop Systems
4U Pro 10 Slot 48
Use the Mac address to find the IP address assigned to that port over the network to access the IPMI web interface.
You can use “arp –a” command on Windows and “arp – n” on Linux.
•
From the output arp table, search for the Mac address of your IPMI module and match that to the assigned IP address
•
Once you have identified the Mac address and the IP address, use the IP address to access the IPMI web interface.
Below photo is an example of Windows powershell cmdlet for querying the IP address using the Mac address.
15.3 Start Internet browser
Launch your internet browser and type the IP address for example 192.168.1.153.
Below photo is the Web interface of the IPMI monitoring the following hardware;
1. Fan status and speed
2. Backplane temperature
3. Power supply voltage and temperature