manualshive.com logo in svg

Oshkosh Corporation JLG E600, Руководство по эксплуатации и безопасности

Поделиться
Скачать
Oshkosh Corporation JLG E600 Скачать руководство пользователя страница 14

SECTION 1 - SAFETY PRECAUTIONS

1-4

– JLG Lift –

3121217

• Before operating the machine, make sure all gates are

closed and fastened in their proper position. 

• Keep both feet firmly positioned on the platform floor at all

times. Never use ladders, boxes, steps, planks, or similar
items on platform to provide additional reach.

• Never use the boom assembly to enter or leave the plat-

form.

• Use extreme caution when entering or leaving platform.

Be sure that the boom is fully lowered. It may be neces-
sary to telescope out to position the platform closer to the
ground for entry/exit. Face the machine, maintain “three
point contact” with the machine, using two hands and one
foot or two feet and one hand during entry and exit. 

Electrocution Hazards

• This machine is not insulated and does not provide pro-

tection from contact or proximity to electrical current. 

www.

duma

-rent.com

Содержание JLG E600







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды