SECTION 2 - PREPARATION AND INSPECTION
2-4
31215862
2.3 PRE-START INSPECTION
The Pre-Start Inspection should include each of the following:
1. Cleanliness
– Check all surfaces for leakage (oil, fuel,
or battery fluid) or foreign objects. Report any leakage
to proper maintenance personnel.
2. Structure –
Inspect the machine structure for dents,
damage, weld or parent metal cracks or other discrep
-
ancies. Report this to the proper maintenance person
-
nel.
3. Decals and Placards
– Check all for cleanliness and
legibility. Make sure none of the decals and placards
are missing. Make sure all illegible decals and placards
are cleaned or replaced.
4. Operation and Safety Manual
– Make sure a copy of
the Operation and Safety Manual, AEM Safety Manual,
and ANSI Manual of Responsibilities is enclosed in the
weather resistant manual storage container.
5. Walk-Around Inspection
– Refer to Section 2.4.
6. Battery
- Charge is required.
7. Hydraulic Oil
- Check the hydraulic oil level. Ensure
hydraulic oil is added as required.
8. Function Check
- Once the Walk-Around
Inspection is
complete, perform a function check of all systems in
an area free of overhead and ground level obstruc
-
tions. Refer to Section 2.5 for more specific instruc
-
tions.
9. Platform Gate
–
Keep gate and surrounding area
clean and unobstructed. Verify the gate closes prop
-
erly and is not bent or damaged. Keep gate closed at
all times except when entering/exiting the platform
and loading/unloading materials.
10. Lanyard Attach Points
–
JLG Industries, Inc. recom
-
mends personnel in the platform wear a fall/travel
restraint system with a lanyard attached to an autho
-
rized lanyard attach point.
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE
IMMEDIATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PER
-
SONNEL. DO NOT OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR
OPERATION.
.
Parent Metal Crack
Weld Crack
To
order
go
to
Discount-Equipment.com
Содержание JLG 830P
Страница 20: ...SECTION 1 SAFETY PRECAUTIONS 1 12 31215862 NOTES T o o r d e r g o t o D i s c o u n t E q u i p m e n t c o m...
Страница 43: ...SECTION 3 MACHINE OPERATION 3 14 31215862 NOTES T o o r d e r g o t o D i s c o u n t E q u i p m e n t c o m...
Страница 56: ...T o o r d e r g o t o D i s c o u n t E q u i p m e n t c o m...