Oshkosh Corporation JLG 830P, Руководство по эксплуатации и безопасности, Страница: 45 / 56

SECTION 4 - EMERGENCY PROCEDURES
4-2
31215862
Righting of Tipped Machine
Before righting a tipped machine, check machine for any dam -
age which may prevent it from setting properly on its base
wheels once in a vertical position, (i.e. base wheels damaged,
base frame distorted, etc.). Use a crane, forklift or other suitable
lifting equipment and carefully lift the machine to an upright
position.
NOTICE
FOLLOWING ANY INCIDENT, THOROUGHLY INSPECT THE MACHINE AND TEST
ALL FUNCTIONS. DO NOT ELEVATE PLATFORM UNTIL YOU ARE SURE THAT ALL
DAMAGE HAS BEEN REPAIRED, IF REQUIRED AND THAT ALL CONTROLS ARE
OPERATING CORRECTLY.
4.3 INCIDENT NOTIFICATION
JLG Industries, Inc. must be notified immediately of any incident
involving a JLG product. Even if no injury or property damage is
evident, JLG must be contacted by telephone and provided
with all necessary details.
•
USA: 877-JLG-SAFE (554-7233)
•
EUROPE: (32) 0 89 84 82 20
•
AUSTRALIA: (61) 2 65 811111
•
E-mail: productsafety@jlg.com
Failure to notify the manufacturer of an incident involving a JLG
Industries product within 48 hours of such an occurrence may
void any warranty consideration on that particular machine.
NOTICE
FOLLOWING ANY INCIDENT, THOROUGHLY INSPECT THE MACHINE. DO NOT
ELEVATE PLATFORM UNTIL YOU ARE SURE THAT ALL DAMAGE HAS BEEN
REPAIRED, AND THAT ALL CONTROLS ARE OPERATING CORRECTLY. TEST ALL
FUNCTIONS FIRST FROM THE GROUND CONTROL STATION, THEN FROM THE
PLATFORM CONTROL CONSOLE.
To
order
go
to
Discount-Equipment.com