21
•
Ensure that the key switch on your OSET is switched OFF & the battery discharge plug is
disconnected before connecting the charger to the battery
’
s charge port (see guide below).
•
Carefully align the connector pins and connect the charger to the battery by plugging the
connector into the charger receptacle. Twist the lock ring to secure the charger lead to the
battery.
•
Plug the charger into the wall outlet.
•
Switch the charger on.
•
LED Indications:
-
The LED will illuminate
RED
when the charger is plugged into a wall outlet.
-
The Indicator LED will illuminate
YELLOW
while the charger is charging the battery.
-
The Indicator LED will change to
GREEN
when the battery is fully charged.
•
When charging is complete (the Indicator LED is GREEN), switch the charger off, then
carefully unplug the charger from the wall socket, then from the battery by twisting the lock
ring and pulling the connector out of the charging port.
•
Reconnect the battery to the bike and your OSET electric bike is now ready for use.
Use only the battery charger supplied.
Using any other battery charger will void your war-
ranty, may damage the batteries and could cause a fire that may result in property damage
and/or possible injury.
WARNING!
Charging Port
Discharging Port
OSET Charger
Diagnostic Port
(OSET Technicians only)
Battery Vent, Sealed
non serviceable.
Read the instruction booklet that comes with the OSET lithium battery
pack before use.
Ensure charger is disconnected from bike before riding.
Failure to do so will cause damage to the bike and could result in injury.
