14
KEY SWITCH
The key switch turns the power on and off. When the rider is sitting
on the bike, this is located in front of them above the tank cover.
The key is removable, and should be removed when the bike is not
in use.
KILL SWITCH
This switch is in addition to the key switch and provides extra func-
tionality. To enter the on position place magnetic top cap on base.
The key switch MUST be in the
‘
on
’
position for the magnetic kill
switch to operate.
With the key switch in the
‘
on
’
position, the kill switch can be used to
turn the bike on by simply connecting the red magnetic cap to the
black base on the handlebar, to turn the bike off using the kill switch
remove the magnetic red cap from the black base on the handlebar.
As a safety precaution, if the throttle is applied before the kill switch
is connected, the bike will not move.
Always ensure the rider is wearing the kill switch around their wrist
and that the cord is tightened firmly.
DIAL PANEL REMOVAL
The bike
’
s adjustment dials are located beneath the small black panel
which also houses the key switch.
To remove the panel, twist the fastener and lift the front of the
panel up and towards the handlebars.
The battery charge indicator is located on the throttle assembly and
shows the state of the batteries. The indicator lights can be checked
at any time to determine if the main power is off or on. Always turn
the power off and remove the key when the bike is not in use.
NOTE
Now your OSET is fully assembled, adjusted and checked. Once the batteries are fully
charged, your OSET will be ready to ride safely.
CHARGE INDICATOR
