24
MAINTAINING YOUR OSET
Before each ride:
•
Check key fasteners are correctly tightened: Sprocket bolts, wheels nuts, bar and stem
bolts, brake levers and callipers.
•
Check throttle freely returns to off position.
•
Check chain adjustment.
•
Check brakes work and wheels spin freely.
•
Check the speed, power and response setting.
•
Check the tires for proper inflation. Also, inspect the tires for damage.
•
Check safety lanyard operates correctly
•
Ensure batteries are fully charged.
After each ride:
•
Remove battery, clean and dry your OSET, following OSET
’
s recommended procedure.
•
Ensure grips are intact with bar ends covered, replace if needed.
•
Check the wheel spokes for tightness. It is normal for spokes to loosen in operation on
the first few rides. Please check after the first 5 rides, and then monthly afterwards.
Every 20 hours of riding:
•
Remove wheels and inspect bearings. Re
-
grease front wheel axle.
•
Check swing arm axle bearings and grease axle mating face.
•
Check ALL bolts for correct tightness. Grease where applicable. (I.e Stem bolts)
•
Check wiring for corrosion, defects, re
-
grease all connections with die electric grease.
•
Check wheels are running true and spokes are correctly tightened.
•
Inspect chain and sprockets for wear.
•
Check brake lines and pads.
Please refer to component manuals for specific service intervals.
If you have any questions about the proper care and maintenance of this vehicle, consult
your selling dealer/distributor or contact OSET Customer Service at [email protected].
Failure to maintain this vehicle in proper operating condition can lead to an accident
resulting in death or serious injury, and property damage.
WARNING
