16
REAR WHEEL INSTALLATION
(2.)
Chain tensioner nut (13mm)
1.
Ensure power is switched off and the key removed.
2.
Lift the bike onto a block or stand so the wheels are off the ground.
3.
Loosen the axle bolts
(see image 1.)
4.
Loosen the chain adjustment nuts to the point where the wheel can be pushed forward,
and the chain slipped off to the right of the sprockets
(see image 2.)
5.
Pull back on the wheel to remove it.
6.
To re
-
install the wheel reverse the above procedures. Ensure the chain is correctly
adjusted and lubricated, the wheel is aligned, and all nuts and bolts are tight
(1.)
Axle Nut (19mm)
